Series 80Q-SPLDownload PDFCatalogue No.:UT-80Q-SPL | Revision 00

This is a simple variation of series 80Q. 80Q SPL permits larger bore capacity.

General Assembly Drawing

Series 80 QSPL Diagram

Dimensions and Standard Sizes

Size Nominal Rating Peak Max Max Max G E-Hub D F Std
  HP/100 Torque Torque Speed Bore D1 Bore D2 Dia Length Dia Dia C
  RPM NM NM RPM MM MM MM MM MM MM MM
250 37 2635 5270 15300 90 115 130 76 173 167 140
300 84 5985 11970 14000 110 140 157 86 203 198 180
312 84 5985 11970 14000 110 140 157 86 203 198 180
350 95 6770 13540 13000 115 155 162 95 227 221 180
375 150 10685 21370 11700 130 170 187 102 252 246 200
425 210 14960 29920 10800 130 185 191 108 273 273 200
450 260 18500 37000 10000 145 200 211 114 293 293 250
500 400 28500 57000 8860 175 230 251 127 333 333 250

Engineering Data

Size Mass Inertia
 Maximum Misalignment Torsional
 Axial
Spring
Rate		 Bolt Torque
      AXIAL RADIAL Stiff
  KG KG.M^2 MM MM MNM/Rad N/MM # NM ##MM
250 22.0 0.10 2.2 1.2 0.80 220 80 48
300 36.0 0.22 3.0 1.2 1.10 370 200 80
312 32.2 0.20 1.9 1.2 1.40 415 80 80
350 46.0 0.37 2.0 1.2 1.50 500 200 200
375 61.0 0.58 2.3 1.5 2.80 540 200 200
425 85.0 0.99 2.5 1.5 3.70 725 400 400
450 106.0 1.42 2.8 1.7 5.80 755 400 400
500 137.0 2.47 3.0 1.9 6.60 920 400 400
Mass, Inertia,Stiffness are at max bore with standard dimension C listed above. Other C Dimension C dimension are available as required on request .Hub dimensions can be modified to suit special needs. Max angular misalignment 0.50 Deg /Pack .Misalignment limits are for speeds upto 3000 RPM. For higher Speeds consult us. Bolt Tightening Torques - # for Disc Pack Bolts, ## for Hub Bolts .
Download PDFCatalogue No.:UT-80Q-SPL | Revision 00