Series 80L SPLDownload PDFCatalogue No.:UT-80L SPL | Revision 00

This style is also a simple variation of Series 80 with large hub at both ends and is suitable for applications where both driving and driven shaft diameters are comparatively large.

General Assembly Drawing

Series 80L SPL Diagram

Dimensions and Standard Sizes

Size Nominal HP/100 Rating Torque Peak Torque Max Speed Max Bore D1 Max Bore D2 D Dia F Dia E, Hub Length Std C
  RPM NM NM RPM MM MM MM MM MM MM
65 0.45 32 64 20000 28 24 34 28 63 100
80 0.90 64 128 20000 32 28 40 30 72 100
100 1.80 128 256 18650 38 32 46 32 83 100
125 2.60 185 370 15800 50 42 59 41 98 100
150 4.00 285 570 15800 50 42 62 45 102 100
162 7.00 500 1000 13900 60 48 71 48 111 140
180 9.00 640 1280 12500 67 55 78 55 125 140
200 12.00 855 1710 11200 75 55 84 54 138 140
220 15.00 1070 2140 10450 85 65 93 62 148 140
250 25.00 1780 3560 9200 105 80 114 76 168 140
300 56.00 3990 7980 7800 120 90 128 86 198 140
312 56.00 3990 7980 7800 120 100 140 86 198 140
350 70.00 4990 9980 7000 130 105 150 95 221 180

Engineering Data

Size Mass Inertia
MR^2
Maximum
Misalignment
Torsional
Stiff
Axial
Spring
Rate
Bolt Tight Torque
      AXIAL RADIAL  
  KG KG.M^2 MM MM MNM/Rad N/MM # NM
65 1.2 0.0006 1.0 0.6 0.01 25 6
80 1.6 0.0012 1.2 0.6 0.02 30 10
100 2.5 0.0023 2.0 0.6 0.06 50 24
125 4.0 0.0057 2.0 0.8 0.06 60 24
150 4.5 0.0069 1.3 0.8 0.06 150 24
162 5.9 0.0100 1.3 1.2 0.18 100 24
180 7.9 0.0180 1.5 1.2 0.20 130 48
200 9.5 0.0260 1.8 1.2 0.20 165 48
220 11.9 0.0390 2.0 1.2 0.26 130 48
250 17.4 0.0740 2.2 1.2 0.38 195 48
300 28.4 0.1700 3.0 1.2 0.64 370 200
312 27.4 0.1700 1.9 1.2 0.64 415 80
350 33.0 0.2000 2.0 1.2 1.07 500 200
Mass, Inertia,Stiffness are at max bore with standard dimension C listed above. Other C Dimension C dimension are available as required on request .Hub dimensions can be modified to suit special needs. Max angular misalignment 0.50 Deg /Pack .Misalignment limits are for speeds upto 3000 RPM. For higher Speeds consult us. Bolt Tightening Torques - # for Disc Pack Bolts, ## for Hub Bolts .
Download PDFCatalogue No.:UT-80L SPL | Revision 00