Series 80X Download PDFCatalogue No.:UT-80X | Revision 00

Series 80 X with captured center member.This feature prevents the spacer subassembly to fly away in unlikely event of failure of discs or bolts.

General Assembly Drawing

Series 80 X Diagram

Dimensions and Standard Sizes

Size Nominal HP/100 Rating Torque Peak Torque Max Speed Max Bore E, Hub Length D Dia G Dia Std C
  RPM NM NM RPM MM MM MM MM MM
65 0.45 32 64 25000 28 28 66 42 100
80 0.90 64 128 25000 38 30 75 54 100
100 1.80 128 256 25000 42 32 87 60 100
125 2.60 185 370 20000 48 41 102 70 100
150 4.00 285 570 20000 48 45 105 69 100
162 7.00 500 1000 18000 55 48 115 80 140
180 9.00 640 1280 18000 65 55 130 90 140
200 12.00 855 1710 16000 70 54 143 100 140
220 15.00 1070 2140 16000 80 62 152 112 140
225 18.00 1282 2564 14600 75 67 150 110 140
250 25.00 1780 3560 12300 90 76 173 130 140
262 33.00 2350 4700 12300 90 76 173 130 140
300 56.00 3990 7980 11000 110 86 203 157 180
312 56.00 3990 7980 11000 110 86 203 157 180
350 70.00 4990 9980 10500 115 95 227 162 180
375 100.00 7125 14250 10000 130 102 252 187 200
425 140.00 9975 19950 8000 130 108 273 191 200
450 170.00 12110 24220 7000 145 114 293 211 250
500 270.00 19230 38460 6000 175 127 333 251 250
550 400.00 28500 57000 5360 190 148 373 270 300
600 500.00 35625 71250 4850 210 153 412 AS REQD 300
700 800.00 57000 114000 4250 240 178 470 DO 325
750 1100.00 78375 228000 3920 270 191 510 DO 325
800 1600.00 114000 302000 3600 300 210 553 DO 350

Engineering Data

Size Mass Inertia Maximum
Misalignment
Torsional
Stiff
Axial
Spring Rate
Bolt Tight Torque
      AXIAL RADIAL  
  KG KG.M^2 MM MM MNM/Rad N/MM # NM ## MM
65 1.5 0.001 1.0 0.6 0.017 25 6 6
80 2.1 0.002 1.2 0.6 0.031 30 10 6
100 3.0 0.003 2.0 0.6 0.044 50 24 10
125 4.7 0.007 2.0 0.8 0.080 60 24 24
150 4.8 0.006 1.3 0.8 0.130 150 24 24
162 6.6 0.011 1.3 1.2 0.210 100 24 24
180 9.2 0.020 1.5 1.2 0.270 130 48 48
200 11.0 0.030 1.8 1.2 0.370 165 48 48
220 13.5 0.043 2.0 1.2 0.470 130 48 48
225 14.5 0.044 1.4 1.2 0.600 275 48 48
250 20.0 0.082 2.2 1.2 0.800 195 48 48
262 20.0 0.082 1.5 1.2 1.100 350 48 48
300 34.0 0.190 3.0 1.2 1.400 370 200 80
312 30.0 0.170 1.9 1.2 1.500 415 80 80
350 42.0 0.300 2.0 1.2 2.800 500 200 200
375 55.0 0.470 2.3 1.5 3.700 540 200 200
425 75.0 0.770 2.5 1.5 5.800 725 400 400
450 97.0 1.150 2.8 1.7 6.600 755 400 400
500 122.0 1.950 3.0 1.9 11.000 920 400 400
550 155.0 3.000 3.2 2.1 16.900 920 540 540
600 205.0 4.900 3.7 2.1 19.000 900 700 700
700 314.0 9.800 4.1 2.4 39.000 1230 1400 1400
750 395.0 14.200 4.6 2.4 ON REQ 1480 1800 1400
800 580.0 26.000 5.0 2.6 ON REQ ON REQ 2400 1400
These couplings have captured centre member this feature prevents spacer sub assembly from flying off even in unlikely event of disc as well as bolt failure. Mass and inertia, stiffness are at max bore with standard spacer. Dimension c listed above. Other C dimensions are available as required on request. Hub dimensions can be modified to suit special needs. Max angular misalignment 0.50 deg/pack. Misalignment limits are for speeds upto 3000 rpm. For higher speeds consult us. Bolt tightening torques - # for disc pack bolts, ## for hub bolts.
Download PDFCatalogue No.:UT-80X | Revision 00