Series 80L SPDownload PDFCatalogue No.:UT-80L SP | Revision 00

This style is also a simple variation of Series 80L with large hub at both ends and is suitable for applications where both driving and driven shaft diameters are comparatively large.

General Assembly Drawing

Series 80L SP Diagram

Dimensions and Standard Sizes

Size Nominal HP/100 Rating Torque Peak Torque Max Speed Max Bore D1 E, Hub Length D Dia Std C
  RPM NM NM RPM MM MM MM MM
65 0.45 32 64 20000 28 28 63 100
80 0.9 64 128 20000 32 30 72 100
100 1.8 128 256 18650 38 32 83 100
125 2.6 185 370 15800 50 41 98 100
150 4 285 570 15800 50 45 102 100
162 7 500 1000 13900 60 48 111 140
180 9 640 1280 12500 65 55 125 140
200 12 855 1710 11200 75 54 138 140
220 15 1070 2140 10450 80 62 148 140
250 25 1780 3560 9200 100 76 168 140
300 56 3990 7980 7800 115 86 198 140

Engineering Data

Size Mass Inertia
MR^2		 Maximum
Misalignment		 Torsional
Stiff		 Axial
Spring
Rate		 Bolt Tight Torque
AXIAL RADIAL
  KG KG.M^2 MM MM MNM/Rad N/MM # NM
65 1.5 0.0008 1.0 0.6 0.01 25 6
80 2.1 0.0016 1.2 0.6 0.02 30 10
100 3.0 0.0031 2.0 0.6 0.06 50 24
125 4.8 0.0074 2.0 0.8 0.06 60 24
150 5.4 0.0090 1.3 0.8 0.06 150 24
162 7.1 0.0140 1.3 1.2 0.18 100 24
180 10.0 0.0240 1.5 1.2 0.20 130 48
200 12.0 0.0360 1.8 1.2 0.20 165 48
220 15.0 0.0520 2.0 1.2 0.26 130 48
250 21.0 0.1000 2.2 1.2 0.38 195 48
300 35.0 0.2290 3.0 1.2 0.64 370 200
Mass, Inertia,Stiffness are at max bore with standard dimension C listed above. Other C Dimension C dimension are available as required on request .Hub dimensions can be modified to suit special needs. Max angular misalignment 0.50 Deg /Pack .Misalignment limits are for speeds upto 3000 RPM. For higher Speeds consult us. Bolt Tightening Torques - # for Disc Pack Bolts, ## for Hub Bolts .
Download PDFCatalogue No.:UT-80L SP | Revision 00