Series 80 CCDownload PDFCatalogue No.:UT-80CC | Revision 00

The design permits very small distance between shaft ends. The design is ideal for applications where non-spacer Gear couplings are to be replaced by Metaflex Couplings.This design has twin disc packs permitting misalignment in all directions.Either driving or driven equipment is to be shifted for removal of disc packs.

General Assembly Drawing

Series 80 CC Diagram

Dimensions and Standard Sizes

Size Nominal Rating Peak Max Max B, Hub A C
  HP/100 Torque Torque Speed Bore Length Dia  
  RPM NM NM RPM MM MM MM MM
65 0.45 32 64 20000 15 28 63 3
80 0.90 64 128 20000 18 30 72 3
100 1.80 128 256 18650 20 32 83 3
125 2.60 185 370 15800 26 41 98 3
162 7.00 500 1000 13900 42 48 111 3
200 12.00 855 1710 11200 53 54 138 3
220 15.00 1070 2140 10450 60 62 148 3
225 18.00 1282 2564 10450 60 67 145 3
250 25.00 1780 3560 9200 70 76 168 5
262 33.00 2350 4700 9200 75 76 168 5
300 56.00 3990 7980 7800 75 86 198 5
312 56.00 3990 7980 7800 90 86 198 5
350 70.00 4990 9980 7000 90 95 221 6
375 100.00 7125 14250 6300 110 102 246 6
425 140.00 9975 19950 5800 115 108 267 6
450 170.00 12110 24220 5400 125 114 287 8
500 270.00 19230 38460 4700 140 127 327 8
550 400.00 28500 57000 4200 160 148 367 10
600 500.00 35625 71250 3800 180 153 406 10
700 800.00 57000 114000 3300 200 178 464 10
750 1100.00 78375 228000 3000 210 191 503 12
800 1600.00 114000 302000 3000 220 210 546 12

Engineering Data

Size Mass Inertia
MR^2		 Maximum Misalignment Torsional
Stiff		 Axial
Spring
Rate		 Bolt Tigh Torque
      AXIAL RADIAL  
  KG KG.M^2 MM MM MNM/Rad N/MM # NM ##MM
65 0.9 0.0004 1 0.6 0.01 25 6 6
80 1.2 0.0007 1.2 0.6 0.02 30 10 6
100 2.0 0.0013 2 0.6 0.06 50 24 6
125 3.0 0.004 2 0.8 0.06 60 24 10
162 4.0 0.007 1.3 0.8 0.18 100 24 10
200 7.6 0.018 1.8 0.8 0.20 165 48 24
220 9.4 0.026 2.0 0.8 0.26 130 48 24
225 9.8 0.027 1.4 0.8 0.26 275 48 24
250 13.7 0.048 2.2 0.9 0.38 195 48 24
262 13.7 0.049 1.5 0.9 0.44 350 48 24
300 22.0 0.10 3.0 1.2 0.64 370 200 24
312 21.0 0.11 1.9 1.2 0.64 415 80 24
350 30.0 0.19 2.0 1.2 1.07 500 200 48
375 41.0 0.31 2.3 1.5 1.38 540 200 80
425 54.0 0.50 2.5 1.5 2.14 725 400 80
450 64.0 0.69 2.8 1.7 2.36 755 400 200
500 92.0 1.24 3.0 1.9 3.92 920 400 200
550 126.0 2.19 3.2 2.1 5.64 920 540 200
600 167.0 3.45 3.7 2.1 6.93 900 700 400
700 259.0 7.15 4.1 2.4 11.3 1230 1400 540
750 321.0 10.25 4.6 2.4 15 1480 1800 700
800 428.0 16.12 5.0 2.6 ON REQ ON REQ 2400 700
Mass, Inertia,Stiffness are at max bore with standard dimension C listed above. Other C Dimension C dimension are available as required on request .Hub dimensions can be modified to suit special needs. Max angular misalignment 0.50 Deg /Pack .Misalignment limits are for speeds upto 3000 RPM. For higher Speeds consult us. Bolt Tightening Torques - # for Disc Pack Bolts, ## for Hub Bolts .
Download PDFCatalogue No.:UT-80CC | Revision 00