Series 54 CCSDownload PDFCatalogue No.:UT-54 CCS | Revision 00

The design permits very small distance between shaft ends.The design is ideal for applications where nonspacer Gear Couplings are to be replaced by Metaflex Couplings.

The design has twin disc packs & accommodates misalignment in all directions. The design however requires either driving or driven machine to be shifted for removal of disc packs.

Spacer in split Design.

Permits removal of Discs In situ without having to shift connected machines.

General Assembly Drawing

Series 54 CCS Diagram

Dimensions and Standard Sizes

Size Nominal HP/100 Rating Torque Peak Torque Max Speed Max Bore E, Hub Length D Dia C Dia
  RPM NM NM RPM MM MM MM MM
100 1.8 128 256 7400 25 39 83 3
125 3.7 263 526 7200 32 47 98 3
162 6.9 491 982 7000 42 48 111 3
200 13.5 962 1924 6300 53 54 138 3
225 17.0 1211 2422 6000 58 58 145 3
262 27.8 1980 3960 5500 70 66 168 5
312 38.6 2750 5500 5000 85 72 198 5
350 54.1 3854 7708 4500 100 83 221 6
375 81.1 5777 11554 4000 110 92 246 6
425 115.0 8192 16384 3700 110 101 267 6
450 130.0 9261 18522 3400 120 114 287 8
500 197.0 14035 28070 3300 140 120 327 8
550 341.0 24290 48580 2800 160 135 367 10
600 427.0 30420 60840 2500 175 153 406 10
700 549.0 39110 78220 2500 180 178 464 10

Engineering Data

Size Mass Inertia MR^2 Maximum Misalignment Disc Pack Bolt TT
      AXIAL RADIAL  
  KG KG.M^2 MM MM MNM/Rad
100 1.8 0.0010 0.9 0.6 10
125 3.1 0.0035 0.9 0.8 24
162 4.4 0.0070 0.9 1.2 24
200 7.3 0.0190 0.9 1.2 48
225 8.2 0.0240 0.9 1.2 48
262 14.1 0.0530 1.1 1.2 48
312 22.0 0.1200 1.3 1.2 80
350 31.0 0.2100 1.4 1.2 200
375 43.0 0.3600 1.6 1.5 200
425 57.0 0.5600 1.7 1.5 400
450 75.0 0.8500 1.8 1.7 400
500 110.0 1.5900 2.1 1.9 400
550 158.0 2.8800 2.3 2.1 540
600 218.0 4.8400 2.6 2.1 700
700 324.0 9.3500 2.9 2.4 1400
Mass, Inertia, Stiffness are at max bore with standard dimension C listed above. Other C Dimension C dimension are available as required on request. Hub dimensions can be modified to suit special needs. Max angular misalignment 0.50 Deg /Pack. Misalignment limits are for speeds upto 3000 RPM. For higher Speeds consult us. Bolt Tightening Torques - # for Disc Pack Bolts, ## for spacer bolts.
Download PDFCatalogue No.:UT-54 CCS | Revision 00