Series 52Download PDFCatalogue No.:UT-52 | Revision 00

Series 52 are high speed as well as high torque capacity couplings. The costruction is in spacer design with central spacer member being removable without having to shift either driving or driven machine. The discs are loose ( not unitized) . The couplings have comparatively low moment of Inertia & high torsional stiffness.

General Assembly Drawing

Series 52 Diagram

Dimensions and Standard Sizes

Size Nominal HP/100 Rating Torque Peak Torque Max Speed Max Bore E, Hub Length D Dia G Dia Std C
  RPM NM NM RPM MM MM MM MM MM
100 1.8 128 256 15000 32 32 83 46 90
125 3.7 263 526 15000 42 41 98 59 100
162 6.9 491 982 13900 48 48 111 71 140
200 13.5 962 1924 11200 55 54 138 84 140
225 19.0 1353 2706 10450 65 67 145 95 140
262 27.8 1980 3960 9200 80 76 168 114 140
312 38.6 2750 5500 7800 95 86 198 140 140
350 73.6 5243 10486 7000 105 95 221 150 140
375 98.6 7025 14050 6300 115 102 246 170 180
425 114.0 8120 16240 5800 120 108 267 178 180
450 137.0 9760 19520 5400 135 114 287 194 200
500 257.0 18310 36620 4700 155 127 327 226 225
550 341.0 24290 48580 4200 180 148 367 256 250
600 471.0 33550 67100 3800 190 153 406 276 250
700 659.0 46945 93890 3300 220 178 464 318 275
750 846.0 60265 120530 3000 220 191 503 321 275
800 1103.0 78575 157150 3000 240 210 546 349 305

Engineering Data

Size Mass Inertia
MR^2
Maximum
Misalignment
Torsional
Stiff
Axial
Spring
Rate
Bolt Tight Torque
      AXIAL RADIAL  
  KG KG.M^2 MM MM MNM/Rad N/MM # NM
100 1.5 0.0010 0.9 0.6 0.07 50 10
125 2.0 0.0020 0.9 0.8 0.07 70 24
162 4.0 0.0040 0.9 1.2 0.21 100 24
200 6.0 0.0130 0.9 1.2 0.24 190 48
225 8.0 0.0190 0.9 1.2 0.31 275 48
262 13.0 0.0430 1.1 1.2 0.50 350 48
312 20.0 0.0900 1.3 1.2 0.76 415 80
350 28.0 0.1600 1.4 1.2 1.10 500 200
375 38.0 0.2800 1.6 1.5 1.50 540 200
425 50.0 0.4200 1.7 1.5 2.35 725 400
450 60.0 0.6000 1.8 1.7 2.60 755 400
500 88.0 1.1200 2.1 1.9 4.30 920 400
550 126.0 2.1000 2.3 2.1 6.20 920 540
600 169.0 3.4000 2.6 2.1 7.60 900 700
700 258.0 6.6000 2.9 2.4 12.40 1230 900
750 325.0 9.7000 3.2 2.4 16.50 1480 1130
800 415.0 14.8000 3.5 2.6 ON REQ ON REQ 1500
Mass and inertia, stiffness are at max bore with standard spacer. Dimension C listed above. Other C dimensions are available as required on request. Hub dimensions can be modified to suit special needs. Max angular misalignment 0.50 deg/pack. Misalignment limits are for speeds upto 3000 rpm. For higher speeds consult us.
Download PDFCatalogue No.:UT-52 | Revision 00