Series SL 420Download PDFCatalogue No.: UT-GSL | Revision 00

Key Features

  • Teeth Curved as well as barreled
  • Improved Seals – Perform much better than O rings
  • Full Teeth engagement – Reduces uneven wear
  • Piloting on Teeth OD – Ensures better dynamic balance
  • Higher Bore capacities
  • Compact
  • Wide Range – Full Gear , Semi Gear , Spacer Couplings
  • Full Floating & Semi Floating Shafts

General Assembly Drawing

Series 80 CC Diagram

Dimensions and Standard Sizes

Size HP/100 Nom Torque Peak Torque Max Speed Max Bore A B Dia D Dia E G
  RPM NM NM RPM RPM MM MM MM MM MM
SL100 12 855 1710 10000 40 87 82 57 42 3
SL100M 12 855 1710 10000 40 87 82 57 42 3
SL150 24 1710 3420 7400 55 103 120 78 50 3
SL180 50 3560 5800 5900 77 127 140 100 62 3
SL195 65 4630 7730 5600 80 127 160 113 75 5
SL210 90 6410 10700 5000 90 165 175 126 80 5
SL240 150 10685 16400 4300 100 185 195 140 90 5
SL250 185 13180 21100 4300 110 185 210 155 90 5
SL290 230 16380 25200 3900 125 226 240 170 110 6
SL320 428 30500 45750 3500 140 246 275 190 120 6
SL350 587 41800 62700 3200 165 278 300 216 135 8
SL390 793 56500 84750 2900 180 318 330 240 155 8
SL420 1032 73500 116000 2700 200 348 360 265 170 8

Engineering Data

Size Pilot Bore wt MR^2 Max
Misalignment
Ang Axial Grease Reqd
  MM Kg KgM^2 MM Deg +-MM Kg
SL100 15 003.0 0.003 0.8 1.5 3 0.05
SL100M 15 003.2 0.004 0.8 1.5 3 0.06
SL150 15 007.7 0.014 0.9 1.5 3 0.11
SL180 20 014.0 0.034 1.1 1.5 3 0.16
Sl195 30 017.0 0.054 1.2 1.5 5 0.20
SL210 40 022.0 0.084 1.4 1.5 5 0.30
SL240 40 032.0 0.152 1.6 1.5 5 0.45
SL250 40 037.0 0.203 1.7 1.5 5 0.50
SL290 50 053.0 0.380 1.8 1.5 6 0.56
SL320 50 075.0 00.71 2.0 1.5 6 00.9
SL350 50 104.0 01.16 2.4 1.5 8 01.6
SL390 60 153.0 02.10 2.8 1.5 8 02.1
SL420 75 198.0 03.20 3.0 1.5 8 03.0
Mass and Inertia MR^2 are at pilot bore. Limited End Float , Extra end Float on request . Dimension H is alignment Clearance.
Download PDFCatalogue No.:UT-GSL | Revision 00